News
-
Forming Technology of Thin Wall Welded Steel Pipe
1. Downhill forming method: Downhill shaping of welded steel pipe equipment can significantly reduce edge extension. 2. Increase the middle extension of the billet: During the forming process, the reduction of the opening pass pattern is increased, so that the gap between the upper and lower roll...Read more -
Deviation and Forming Method of Large Diameter Steel Pipe in Production
Deviation of large-diameter steel pipes in production: Common large-diameter steel pipe size range: outer diameter: 114mm-1440mm wall thickness: 4mm-30mm. Length: according to customer requirements can be made in fixed length or indefinite length. Large-diameter steel pipes are widely used in var...Read more -
Classification and anticorrosion of oil casing
Oil casing can be roughly divided into 1. The surface casing is according to different usage methods. Second, the middle casing. 3. Production casing. 4. Drilling casing. The surface casing is mainly to suspend and support the subsequent layers of the casing through the casing head installed on t...Read more -
What does the hot rolling process in stainless steel pipe fittings mean
Simply put, the process of rolling stainless steel pipe fittings after heating and controlling them above the recrystallization temperature is called hot rolling. The process of rolling below the recrystallization temperature, including at room temperature, is called cold rolling. Hot-rolled stee...Read more -
What advantages of steel pipe fitting tees
1. It completely solves the problem of mutual friction between the closed surfaces of traditional connecting pipes and affects the sealing; the flow resistance is small, and the resistance coefficient of the stainless steel tee is equal to that of the pipe section of the same length; 2. The stain...Read more -
Position regulation and purity improvement of straight seam steel pipe induction coil
Adjustment of the position of the high-frequency induction coil of the straight seam steel pipe: The excitation frequency of straight seam steel pipe is inversely proportional to the square root of capacitance and inductance in the excitation circuit or proportional to the square root of voltage ...Read more