Knowledge related to high-pressure boiler steel pipes – high-pressure boiler steel pipes: mainly used to manufacture high-quality carbon structural steel, alloy structural steel, and stainless heat-resistant steel seamless steel pipes for steam boiler steel pipes with high pressure and above. These boiler steel pipes are The party works under high temperature and high pressure, and the pipe will also undergo oxidation and corrosion under the action of high-temperature flue gas and water vapor. Therefore, the steel pipe is required to have high lasting strength, high oxidation resistance, and good organizational stability. Steel grades include high-quality carbon structural steel grades 20G, 20MnG, and 25MnG; alloy structural steel grades 15MoG, 20MoG, 12CrMoG, 15CrMoG, 12Cr2MoG, 12CrMoVG, 12Cr3MoVSiTiB, etc.; rusty and heat-resistant steels commonly used are 1Cr18Ni9, 1Cr18Ni11Nb high-pressure boiler steel tubes In addition to ensuring the chemical composition and mechanical properties, hydraulic pressure tests, expansion and flattening tests must be performed one by one. Steel pipes are delivered in heat-treated conditions. In addition, there are also certain requirements for the microstructure, grain size, and decarburization layer of the finished steel pipe. Seamless steel pipes for geological drilling and oil drilling control; drilling rigs are used to drill wells to explore underground rock structures, groundwater, oil, natural gas, and mineral resources. The exploitation of oil and natural gas is inseparable from well drilling. Seamless steel pipes for oil drilling for geological drilling control are the main equipment for drilling, mainly including outer core pipes, inner core pipes, casings, drill pipes, etc. Since drilling pipes have to go deep into the stratum of several thousand meters, the working conditions are extremely complex. The drill pipe is subjected to stresses such as tension, compression, bending, torsion, and uneven impact loads, and is also subject to mud and rock wear. Therefore, it is required The pipe must have sufficient strength, hardness, wear resistance, and impact toughness. The steel used for steel pipes is represented by “DZ” (the Chinese pinyin prefix for geology) plus a number one to represent the steel yield point. Commonly used steel grades include DZ45 45MnB and 50Mn ; DZ50′s 40Mn2, 40Mn2Si; DZ55′s 40Mn2Mo, 401MmnVB; DZ60′s 401MuMoB, DZ65′s 27MrMoVB. Steel pipes are delivered in heat-treated conditions. Petroleum cracking tubes: seamless tubes for furnace tubes, heat exchanger tubes, and pipelines in petroleum refineries. Commonly used are high-quality carbon steel (10, 20), alloy steel (12CrMo, 15CrMo), heat-resistant steel (12Cr2Mo, 15Cr5Mo), stainless steel (1Cr18Ni9, 1Cr18Ni9Ti). In addition to verifying the chemical composition and various mechanical properties of steel pipes, steel pipes must also ensure water pressure, flattening, flaring, and other tests, as well as surface quality and non-destructive testing. Steel pipes are delivered in heat-treated condition. Stainless steel pipes: Hot-rolled and cold-rolled stainless steel pipes made of various stainless steels are widely used in petroleum and chemical equipment pipelines and stainless steel structural parts for various purposes. In addition to ensuring the chemical composition and mechanical properties, any pipes used to withstand fluids and pressures Steel pipes must pass the hydraulic pressure test. Various special steel pipes must ensure conditions according to regulations.
Post time: Jan-23-2024